Youth Valentine's Day DTF Transfer Gang Sheet - 15 Transfers. 23x40" Ready To Press Premium Quality Full-Color Printing

Sold by LunoPrint

(1)

7 sold

Specification:Please select

Default

Quantity:

About this shop

LunoPrint

4.9

1383 Sold

24.6K+ Followers

100%24h response rate

94%Ships within 48h

96%Positive feedback

Reviews

1 global reviews

Blanda

Purchased on TikTok

Item: Default2w ago

About the product

Details

Dangerous Goods Or Hazardous Materials

Description

This listing offers a convenient and vibrant collection of different pre-made designs.⸻Welcome to our Family-run DTF shop from NC!We take pride in printing your transfers the same day or next business day, so you never have to wait long to start creating. Every design is produced using premium films, inks, and adhesive powders, ensuring vibrant colors, smooth application, and long-lasting results that won’t crack or fade.As a small family-run business, we care deeply about every order — from careful printing to secure packaging — so you can shop with confidence knowing your transfers are made with quality and attention to detail.⸻ Some designs may appear with glitter, knitted, or textured effects — please note these are just DTF prints, not real materials. Some dimensions listed may not be exact.This listing offers a convenient and vibrant collection of different pre-made designs.⸻ Application Instructions for DTF Transfers Cut your printsFirst, cut off the control strip that runs along the sheet. Then carefully cut the sheet into individual prints with scissors. Try to leave a margin of film around the print and avoid cutting too close to the image to prevent damage and to make it easier to remove the film later. Position Your DesignPlace your transfer in the desired location and ensure you are not pressing over large wrinkles. Using heat-resistant tape is recommended when pressing on hats or using a household iron to prevent the transfer from moving. With experience, you'll learn when this is needed. PressPress the transfer at 300-320°F / 150°C with high pressure for approximately 10-15 seconds. It is always recommended to test one piece first. Use parchment paper or a protective guard sheet to prevent your garment from directly touching the iron. Sometimes, for certain materials, it is necessary to adjust the temperature or pressure. With a bit of practice, you’ll find the right settings for each garment and material. Let it Cool, Then PeelAfter pressing, let your transfer rest until it is cool to the touch (15-30 seconds for hot peel films). Peel slowly to ensure every piece of your design adheres as you peel. This helps ensure that every part of your design is sticking to your item. If parts of the design are not adhering, lay it back down and press again with added pressure and heat (+15°F). If still unsuccessful, continue increasing the heat by 15°F increments until it works. Repeated pressing won't damage the transfer. For professional use: If you're a professional working with quality equipment, you can fully leverage the benefits of our hot peel transfers. The film can be peeled immediately after pressing — within 2-3 seconds of opening the press. Remember, if you don’t peel it right away, let it cool for 15-30 seconds, or repress to reheat before peeling the film. Second pressImportant: While most other DTF companies advise you to press it just once, this is incorrect. After hundreds of wash tests, we have discovered that a second press is essential to create a superior product. After transferring the design onto the garment and peeling off the film, cover the design with parchment paper or a single layer of t-shirt material and press for approximately 15 seconds. This step enhances your product's value by significantly improving its durability and softness while reducing the shine. For a glossy finish, use a guard sheet for the second press. How to know if everything went wellAdhesion Check: All parts of your design are firmly adhered to the fabric, with no peeling or air bubbles.Fabric Texture: After the second press, you should see the texture of the fabric on the print, indicating that the pressure was sufficient.Softness: The design should feel soft to the touch and not too stiff.No Shine: If you aimed for a matte finish, the shine should be minimal or absent. Following these indicators, you can ensure that the process was successful.⸻Note:Please be aware that the main photo showcases the designs you will receive in this package. The image/designs features a printed glitter/sequin effect. Please note that the actual product does not contain real glitter or sequins. Some dimensions listed may not be exact.⸻ Compatibility with Various Colors: DTF can work with different garment colors, providing flexibility and expanding the creative possibilities, even accommodating white ink for darker fabrics.Full-Color Printing: This technique excels in reproducing vibrant and detailed full-color designs, providing a dynamic and eye-catching result.Durability: The printed designs exhibit high durability, ensuring long-lasting and resilient images on the fabric, even after multiple washes.